Our competence for Washing and assembling RTU primary packaging

Washing and assembling RTU primary packaging

Washing and assembling RTU primary packaging containers for the pharmaceutical industry

With our washing and assembly lines we cover a large part of these process steps that are necessary for the production of pre-sterilized packaging.

Whether it's washing and depyrogenating the primary packaging containers, using various siliconization options or assembling closure systems and sealing caps, groninger always has the correct line solution.

Process steps during the manufacturing of RTU packaging containers

There are different process steps involved in the production of ready-to-use syringes, vials or cartridges, from feeding the containers to washing and siliconizing to storing them in nests and tubs.

Feeding glass containers

When the prefillable glass containers are fed into the lines they are usually packed on trays. However, the exact packaging, varies depending on the primary packaging and requires a suitable system for feeding or handling.

Our systems takes care of your needs. groninger has several established solutions in its portfolio, from a detray module and a depalletizing module to state-of-the-art robot applications.

Feeding the glass containers in trays
Feeding the glass containers in trays


The glass containers are cleaned and dried in a washing module. On our lines, we reduced the media consumption to a minimum and are still able to achieve an excellent washing result up to a 3-log reduced cleaning.

Washing the glass containers
Washing the glass containers


The sterilization process developed by groninger attaches great importance to a careful processing method, to easy accessibility of all components for problem-free maintenance, while providing the highest quality and process reliability.

Careful sterilization is already achieved in our innovative sterile tunnel through gentle heating in the inlet area. Quality is also ensured through the use of high-end sterile filters in the sterilization area.

A great advantage of this procedure is the low temperature difference on the object, this characterizes this process. On top of that, it prevents overkill in the sterile process.

The modular structure of the process allows for easy adjustments. At the same time, solutions that do not have a "ring of concern" at the outlet to the sterile area and critical inflatable seals were omitted.

Sterilization of the glass containers
Process for sterilizing the glass containers


Against the backdrop of increasing quality requirements and the increase in biotechnologically produced, protein-based drugs, an even coating of the surfaces of the glass containers with reduced amounts of silicone oil is necessary.

We have succeeded in minimizing the sprayed silicone oil amounts without affecting the sliding forces in our lines.

Siliconizing station for spraying in the silicone oil
Siliconizing station for spraying in the silicone oil


Control made easy: All lines or process steps can be equipped with different test systems. Sensors, state-of-the-art camera systems and complex X-ray systems can be integrated into the process.

These systems can be used to check geometric parameters and inspect glass containers for cosmetic defects. For example, groninger provides a camera system that checks the finger grip of a syringe for broken glass and the correct contour.

Inspection station
There are a large number of different inspection stations on the production lines


One of the most important process steps of these lines is the assembly of various closures, needle guards and caps.

The closures have different properties and tasks. For syringes, the cannula must be protected from damage and kept sterile until the injection. There are also closures that are equipped with a needle protection mechanism, which is intended to protect against injuries on the one hand and prevent accidental reuse on the other.

In the system, all of these components are transported to the respective assembly stations via a specially developed storage and delivery system, where they are assembled on the glass container. Precise assembly of the closures is of the utmost importance.

All assembly processes are subsequently checked by a wide variety of inspection systems.

Tip cap assembly
Tip cap assembly

Tray loading

The processed and closed glass containers can then be used in a wide variety of pharmaceutical end packaging.

A gentle implementation is of great importance, here too the glass containers must not touch each other throughout the entire process. An inspection system can then verify that the final packaging has been completely filled.

At the end the glass containers are inserted into nests and tubs
At the end the glass containers are inserted into nests and tubs